SERINE Aris
عريس سيرين
serine.aris@univ-msila.dz
0659538507 - 0660998217
- Departement of Chemistry
- Faculty of Sciences
- Grade PHd
About Me
Sciences de la Matière
Filiere
Chimie
Location
Bordj Bou Naama, Bordj Bou Naama
Tissamsilt, ALGERIA
Code RFIDE- 1998-06-14 00:00:00
-
SERINE Aris birthday
- 2024-11-18
-
2024-11-18
Eco-Friendly Synthesis of ZnO Nanoparticles and Their Photocatalytic Performance
Water contamination by dyes is an important environmental issue due to their negative effect on the ecosystem and human health. Dyes are widely used in various industries; because of their complex structure and chemical stability, it is difficult to degrade them by conventional treatment methods. Moreover, these methods can be expensive and produce by-products, which cause secondary pollution that needs additional attention. The potential application of nanoparticles in wastewater treatment has attracted a lot of attention. They can be synthesized through various physicochemical processes. Recently, scientific research has focused on the biosynthesis of nanoparticles from plant extracts due to its many benefits, including simple implementation, plentiful raw material availability, and special characteristics that these extracts can contribute to the nanoparticles. The current research is an in-depth investigation and characterization of ZnO nanoparticles using various techniques (XRD, SEM, and TGA) and their application in the treatment of water contaminated by dyes. The results of the parametric study revealed that a system containing 30 ppm of dye and 30 mg of ZnO exhibited high photocatalytic activity with an elimination rate of 71% after 60 minutes. In conclusion, this study has demonstrated that ZnO nanoparticles have potential qualities for treating water. The optimization of operating conditions has significantly improved the yields of decolorization.
Citation
Meriem Imane KHALED , Abdelhakim KHENICHE , Souad TALHI , Serine ARIS , kadi imed eddine, Trari mohammed, ,(2024-11-18), Eco-Friendly Synthesis of ZnO Nanoparticles and Their Photocatalytic Performance,1 st National Conference on Sustainable Management of Waste, Effluents and Emissions (CSMWEE-2024),L'École normale supérieure d'enseignement technologique (ENSET) de skikda,
- 2024-10-31
-
2024-10-31
How a vegetable-fiber-reinforced unsaturated polyester composite's mechanical properties benefited via chemical processing
Environmental and energy conservation pressure has led to a dramatic increase in the need for economically feasible lightweight materials that can be better substituted for non- biodegradable materials in reinforced composites. To this end, this study examines composite materials prepared from unsaturated polyester resins reinforced with treated and untreated Alfa fibers. Fiber treatment was carried out by NaOH solution of 5 % concentration at different times (1, 3, 5 and 24 h). The strength and flexural modulus of the composites were evaluated according to the ASTM D790 test method. The analytical results indicate that the fibers’ alkaline pretreatment time had a positive influence on the mechanical properties of the composites.
Citation
Serine ARIS , ,(2024-10-31), How a vegetable-fiber-reinforced unsaturated polyester composite's mechanical properties benefited via chemical processing,The 1st International Conference on Technological Application of Materials (ICTAM'24),Ferhat Abbas University Setif1, Algeria
- 2024-10-30
-
2024-10-30
Conception de creation of electrolytes and nanocomposite membranes for energy storage systems
The growth in energy consumption follows an exponential logic due to demographic explosions and the strong economic growth of developing countries. The world of scientific research aims to control clean, renewable and recyclable resources and energies on a planetary scale, with the aim of gradually reducing dependence on fossil fuels, within the framework of As part of this work, we developed nano-composites based on polyvinylidene fluoride (PVDF) and a lithium perchlorate filler (LiClO4). This work was devoted to the development of nanocomposite mixtures by applied routes (reverse phase route). The membranes obtained were then characterized by scanning enthalpy calorimetry (DSC) and by TGA thermogravimetric analysis and measurement of electrical conductivity by the four-point method. These different techniques made it possible to demonstrate the presence and dispersion of LiClO4 in the polymer matrix.
Citation
Serine ARIS , ,(2024-10-30), Conception de creation of electrolytes and nanocomposite membranes for energy storage systems,The 1st International Conference on Technological Application of Materials (ICTAM'24),Ferhat Abbas University Setif1, Algeria
- 2024-05-09
-
2024-05-09
Development and design of electrolytes and nanocomposite membranes for battery
Being one of the biggest technological challenges of the twenty-first century, the energy situation has been at the centre of both Algerian and worldwide concerns in recent years. The goal of scientific research is to gradually lessen our reliance on fossil fuels by utilising clean, renewable, and recyclable energy supplies globally. The development of energy storage systems is necessary to ensure the continued consumption of these resources. Although the kind of material we research has long been recognised, the field of macromolecular materials science has really taken off since the discovery of synthetic polymers. In an effort to make the properties of these polymers more widely known, we have conducted a structural investigation of one with exceptional electrical and chemical characteristics. One of the best polymers is poly(vinylidene fluoride) (PVDF), which has exceptional dielectric and piezoelectric properties, the latter of which primarily depends on the presence of polar crystalline structures. For the purpose of researching thermal behaviour and how it relates to structural organisation, this makes it a model semi-crystalline polymer. We have created nanocomposites using a lithium perchlorate (LiClO4) filler and polyvinylidene fluoride (PVDF).
Citation
Serine ARIS , ,(2024-05-09), Development and design of electrolytes and nanocomposite membranes for battery,The 2nd International Conference on Electrochemical, Sciences and Technology (ICEST 2024),UFAS1, Setif, Algerian
- 2024-05-09
-
2024-05-09
Upgrading and characterization of an Alfa fiber-reinforced polymer
Marble was used as an additive and Alfa fibers were used to reinforce the unsaturated polyester matrix throughout the preparation of the composite. The aim of the research is to improve the mechanical properties of this composite. Because of their high physical and chemical qualities, alfalfa fibers are lightweight, biodegradable and affordable. These properties enabled plant fibers to compete with synthetic fibers. We treated them for 24 hours with benzoyl, 0.2% permanganate and 9% sodium hydroxide. Then, to improve the surface of the esparto fibers, we microwaved them for ten minutes. According to the results of tests carried out on the material, treatment with sodium hydroxide at a concentration of 9% for 24 hours a year improved the mechanical properties of the composite and the fibers. According to other treatments, the addition of marble significantly improved mechanical behavior. In this study, infrared spectroscopy and tensile tests were used for diagnostic purposes.
Citation
Serine ARIS , ,(2024-05-09), Upgrading and characterization of an Alfa fiber-reinforced polymer,The 2nd International Conference on Electrochemical, Sciences and Technology (ICEST 2024),UFAS1, Setif, Algerian
- 2024-05-07
-
2024-05-07
Valorisation et élaboration d’un polymère polyester par fibre d’Alfa
Les pressions en matière d'environnement et d'économie d'énergie ont conduit à une augmentation spectaculaire du besoin de matériaux légers économiquement réalisables qui peuvent être mieux substitués aux matériaux non biodégradables dans les composites renforcés. À cette fin, cette étude examine les matériaux composites préparés à partir de résines polyester non saturées renforcées par des fibres Alfa traitées et non traitées. Alfa traitées et non traitées. Le traitement des fibres a été effectué par une solution de NaOH à une concentration de 5 % à différents moments (1, 3, 5 et 24 h). La résistance et le module de flexion des composites ont été ont été évalués selon la méthode de test ASTM D790. Les résultats analytiques indiquent que le temps de prétraitement alcalin des fibres a eu une influence positive sur la résistance et le module de flexion des composites. alcaline des fibres a eu une influence positive sur les propriétés mécaniques des composites.
Citation
Serine ARIS , ,(2024-05-07), Valorisation et élaboration d’un polymère polyester par fibre d’Alfa,Le 2ème colloque national de chimie (CNC2@2024),Msila, Algerie
- 2024-05-07
-
2024-05-07
DÉVELOPPEMENT D’ÉLECTROLYTES ET DE MEMBRANES NANOCOMPOSITES POUR ACCUMULATEUR
La situation énergétique, qui constitue l'un des plus grands défis technologiques du XXIe siècle, a été au centre des préoccupations algériennes et mondiales ces dernières années. L'objectif de la recherche scientifique est de réduire progressivement notre dépendance à l'égard des combustibles fossiles en utilisant des sources d'énergie propres, renouvelables et recyclables à l'échelle mondiale. Le développement de systèmes de stockage de l'énergie est nécessaire pour assurer la consommation continue de ces ressources. Bien que le type de matériaux que nous étudions soit reconnu depuis longtemps, le domaine de la science des matériaux macromoléculaires a réellement pris son essor depuis la découverte des polymères synthétiques. Afin de mieux faire connaître les propriétés de ces polymères, nous avons étudié la structure d'un polymère aux caractéristiques électriques et chimiques exceptionnelles. L'un des meilleurs polymères est le poly(fluorure de vinylidène) (PVDF), qui possède des propriétés diélectriques et piézoélectriques exceptionnelles, ces dernières dépendant principalement de la présence de structures cristallines polaires. Pour l'étude du comportement thermique et de son lien avec l'organisation structurelle, il s'agit donc d'un polymère semi-cristallin modèle. Nous avons créé des nanocomposites en utilisant une charge de perchlorate de lithium (LiClO4) et du fluorure de polyvinylidène (PVDF).
Citation
Serine ARIS , ,(2024-05-07), DÉVELOPPEMENT D’ÉLECTROLYTES ET DE MEMBRANES NANOCOMPOSITES POUR ACCUMULATEUR,Le 2ème colloque national de chimie (CNC2@2024),Msila, Algerie
- 2024-01-10
-
2024-01-10
ELABORATION D’UNE MEMBRANE NANOCOMPOSITES POUR ACCUMULATEUR
Ces dernières années le contexte énergétique est au cœur des préoccupations mondiales et algériennes en particulier, car c’est l’un des plus grands défis technologiques lancés actuellement au 21ème siècle. Le monde de la recherche scientifique vise la maitrise des ressources et d’énergies propres, renouvelables et recyclables à l’échelle planétaire, dans l’objectif d’une diminution graduelle de la dépendance vis-à-vis des énergies fossiles, Ainsi, pour pouvoir consommer ces énergies de manière continue, il est impératif de développer les systèmes de stockage de l’énergie. Notre sujet étude concerne un type de matériaux qui est connu depuis longtemps, mais est avec le développement des polymères de synthèse que la science des matériaux macromoléculaires a pris son essor. Dans le but de faire connaître à un large public les caractéristiques de ces polymères, nous avons fait une analyse structurale qui concerne un qui présente des propriétés chimiques et électriques remarquables. Le poly (vinylidène de Fluorure) (PVDF) est un des meilleurs polymères dont les propriétés diélectriques et piézoélectriques sont remarquables, ces dernières dépendent essentiellement d’existence de structures cristallines polaires. Ce qui lui fait un polymère semi-cristallin modèle pour étude du comportement thermique de sa relation avec leur organisation structurelle, nous avons élaboré des nano-composites à base de polyfluorure de vinylidéne (PVDF) et d’une charge perchlorate de lithium (LiClO4), et on a fait également les différentes techniques de caractérisations à savoir l’analyse de la structure chimique (FTIR), l’analyse thermique (DSC).
Citation
Serine ARIS , ,(2024-01-10), ELABORATION D’UNE MEMBRANE NANOCOMPOSITES POUR ACCUMULATEUR,International Conference on Chemistry of Materials and Sustainable Development (CM2D'23),UFAS1, Setif, Algerian
- 2024-01-10
-
2024-01-10
SYNTHESIS AND BIOLOGICAL ACTIVITY OF HETEROCYCLIC NITROGEN DERIVATIVES
Access to new biologically active heterocyclic compounds requires the development of new rapid synthesis methods and effective. During this work, we were interested in the synthesis of new nitrogen heterocycles by reductive cyclization. The reduction of appropriate ortho-nitrated aromatic compounds can lead directly to forming nitrogen heterocyclic if the reduction products react by addition, condensation, or intermolecular substitution with the other functional groups by forming a C-N bond. Reactions of this type are usually referred to as reductive cyclization. The Z (3-Aminopyridine hydrazone) derivatives were synthesized by the nucleophilic addition of 2- hydrazino-3-nitropyridine to dialkyl pyruvate esters. The study of the reduction of the isomers (Z)-(3-nitro-2-pyridyl) pyruvate of dialkyls by catalytic hydrogenation and a reduction by catalytic heating in the presence of sodium dithionite gave rise to new products. The various physical analysis methods characterized the synthesized products. These included Fourier transform infrared spectroscopy (FT-IR) spectroscopy (FT-IR), nuclear magnetic resonance spectroscopy (NMR) of the proton 1H proton and 13C carbon, and mass spectrometry, revealing the appropriate functional groups. These new findings were tested for antimicrobial activity against bacterial and fungal strains, results show a high activity against some bacteria such as Staphylococcus aureus. The antifungal activity was good against some of them but moderate against others. In summary, the antimicrobial assay of the synthesized compounds showed a strong antibacterial activity toward gram-positive bacteria, as well as a remarkable antifungal activity.
Citation
Serine ARIS , soumya fadli, ,(2024-01-10), SYNTHESIS AND BIOLOGICAL ACTIVITY OF HETEROCYCLIC NITROGEN DERIVATIVES,International Conference on Chemistry of Materials and Sustainable Development (CM2D'23),UFAS1, Setif, Algerian
- 2023-12-20
-
2023-12-20
The inclusion of marble powder and its chemical treatment are investigated in connection to the mechanical properties of an inserted polyester compound reinforced with halfa fibre.
Marble was used as an additive and Alfa fibers were used to reinforce the unsaturated polyester matrix throughout the preparation of the composite. The aim of the research is to improve the mechanical properties of this composite. Because of their high physical and chemical qualities, alfa fibers are lightweight, biodegradable and affordable. These properties enabled plant fibers to compete with synthetic fibers. We treated them for 24 hours with benzoyl, 0.2% permanganate and 9% sodium hydroxide. Then, to improve the surface of the esparto fibers, we microwaved them for ten minutes. According to the results of tests carried out on the material, The mechanical characteristics of the fibres and the composite were enhanced by a 24-hour, year-round treatment with sodium hydroxide at a concentration of 9%. Other treatments indicated that the mechanical behaviour was greatly enhanced by the inclusion of marble. Tensile testing and infrared spectroscopy were employed in this investigation as diagnostic tools.
Citation
Serine ARIS , ,(2023-12-20), The inclusion of marble powder and its chemical treatment are investigated in connection to the mechanical properties of an inserted polyester compound reinforced with halfa fibre.,THE FIRST NATIONAL CONFERENCE ON MATTER SCIENCES NCSM2023,DJELFA-ALGERIA
- 2023-12-20
-
2023-12-20
ELECTROLYTE MEMBRANE DEVELOPMENT AND CHARACTERIZATION FOR AN ACCUMULATOR.
In recent years, the issue of energy - one of the most important technological challenges of the 21st century - has given rise to concern both in Algeria and worldwide. With the aim of gradually reducing our dependence on fossil fuels, scientific research is focusing on the use of clean, renewable and recyclable energy sources worldwide. Energy storage systems are essential to ensure continuous consumption of these resources. Despite the long-standing recognition of the type of materials we study, the field of macromolecular materials science has really grown significantly since the discovery of synthetic polymers. To deepen our understanding of the properties of these polymers, we have analyzed the composition of a polymer with remarkable electrical and chemical characteristics. Poly (vinylidene fluoride) (PVDF) is considered one of the best-performing polymers, with remarkable dielectric and piezoelectric characteristics, which are mainly influenced by the presence of polar crystalline structures. It is therefore a model semicrystalline polymer for studying thermal behavior and its relationship with structural organization. The nanocomposites we have fabricated are composed of lithium perchlorate (LiClO4) and polyvinylidene fluoride (PVDF).
Citation
Serine ARIS , ,(2023-12-20), ELECTROLYTE MEMBRANE DEVELOPMENT AND CHARACTERIZATION FOR AN ACCUMULATOR.,THE FIRST NATIONAL CONFERENCE ON MATTER SCIENCES NCSM2023,DJELFA-ALGERIA
- 2023-12-06
-
2023-12-06
THE MECHANICAL PROPERTIES OF AN UNSATURATED POLYESTER COMPOSITE REINFORCED WITH HALFA FIBERS ARE EXAMINED IN RELATION TO THE ADDITION OF MARBLE POWDER AND ITS CHEMICAL TREATMENT
The unsaturated polyester matrix was reinforced with Alfa fibers and treated with marble as an additive throughout the preparation of the composite. Enhancing the mechanical qualities of this composite is the goal of this research. High physical and chemical qualities that are abundant in nature, such as light weight, biodegradability, and affordability, define alfalfa fibers. Vegetable fibers were able to compete with synthetic fibers due to these qualities. To enhance the Alfa fibers' surface, we treated them for 24 hours with benzoyl, 0.2% permanganate, and 9% soda, then microwaved them for 10 minutes. As compared to the untreated fibers, the mechanical properties of the composite and the fibers improved after being treated with soda at a concentration of 9% for 24 hours, according to the findings of the tests performed on the material. Additional treatments demonstrated that the marble addition significantly improved the mechanical behavior. This study used tensile testing and infrared spectroscopy as diagnostic tools.
Citation
Serine ARIS , azzedine benyahia, nadir deghfel, chouki farsi, ,(2023-12-06), THE MECHANICAL PROPERTIES OF AN UNSATURATED POLYESTER COMPOSITE REINFORCED WITH HALFA FIBERS ARE EXAMINED IN RELATION TO THE ADDITION OF MARBLE POWDER AND ITS CHEMICAL TREATMENT,1ST National Conference on Mechanics and Materials NCMM’2023,Boumerdes University- Algeria
- 2023-12-03
-
2023-12-03
L’EFFET DU TRAITEMENT CHIMIQUE ET DE L’AJOUT DE POUDRE DE MARBRE SUR LES PROPRIETES MECANIQUES D’UN POLYMERE RENFORCE PAR DE FIBRES HALFA
La matrice en polyester insaturé a été renforcée avec des fibres Alfa et traitée avec du marbre comme additif tout au long de la préparation du composite. Améliorer les qualités mécaniques de ce composite est l'objectif de cette recherche. Des qualités physiques et chimiques élevées qui sont abondantes dans la nature, telles que la légèreté, la biodégradabilité et le prix abordable, définissent les fibres de luzerne. Les fibres végétales pouvaient rivaliser avec les fibres synthétiques grâce à ces qualités. Pour améliorer la surface des fibres Alfa, nous les avons traitées pendant 24 heures avec du benzoyle, 0,2 % de permanganate et 9 % de soude, puis les avons passées au micro-ondes pendant 10 minutes. Par rapport aux fibres non traitées, les propriétés mécaniques du composite et des fibres se sont améliorées après avoir été traitées avec de la soude à une concentration de 9% pendant 24 heures, selon les résultats des tests effectués sur le matériau. Des traitements supplémentaires ont démontré que l’ajout de marbre améliorait considérablement le comportement mécanique. Cette étude a utilisé des essais de traction et la spectroscopie infrarouge comme outils de diagnostic.
Citation
Serine ARIS , azzedine benyahia, nadir deghfel, Farsi Chouk, Moussaoui Imane, Khaled Imane Meriem, ,(2023-12-03), L’EFFET DU TRAITEMENT CHIMIQUE ET DE L’AJOUT DE POUDRE DE MARBRE SUR LES PROPRIETES MECANIQUES D’UN POLYMERE RENFORCE PAR DE FIBRES HALFA,the 2nd STUDY DAY ON MATERIALS : SYNTHESIS AND ENERGY APPLICATIONS,Biskra, Algeria.
- 2023-12-03
-
2023-12-03
Traitement d’un colorant par photocatalyse hétérogène d’un spinelle sous énergie solaire
Researchers' studies are focused on polymers, particularly those with functional properties like ferroelectricity or piezoelectricity, electrical conductivity, liquid crystals, and bioactivity, due to the industrial need for materials with specific properties that are readily available and less expensive. We have conducted a structural investigation of one of these polymers that exhibits exceptional chemical and electrical capabilities in order to bring its properties to the attention of a broad audience. One of the best polymers is poly (vinylidene fluoride) (PVDF), which has exceptional dielectric and piezoelectric properties, the latter of which primarily depend on the presence of polar crystal structures. As a result, it can be used as a model semi-crystalline polymer to examine how their structural organisation and thermal behaviour interact.
Citation
Serine ARIS , ,(2023-12-03), Traitement d’un colorant par photocatalyse hétérogène d’un spinelle sous énergie solaire,the 2nd STUDY DAY ON MATERIALS : SYNTHESIS AND ENERGY APPLICATIONS,Biskra, Algeria.
- 2023-12-03
-
2023-12-03
TRAITEMENT D’UN COLORANT PAR PHOTOCATALYSE HETEROGENE D’UNE SPINELLE SOUS ENERGIE SOLAIRE
La pollution des eaux par les colorants est une préoccupation environnementale majeure en raison de son impact négatif sur les écosystèmes et la santé humaine. Les colorants sont largement utilisés dans diverses industries et une quantité significative de ces substances jusqu’à 20% est rejetée dans le milieu naturel. Les méthodes traditionnelles de traitement des eaux peuvent souvent se révéler inefficaces car ils présentent une complexité structurelle et une stabilité chimique qui les rendent difficiles à dégrader. La photocatalyse hétérogène a émergé comme une approche prometteuse pour la dégradation des colorants. Notre objectif est d’évaluer l’efficacité du ZnCo2O4 synthétisé dans la dégradation d’un colorant alimentaire sous irradiation solaire. Dans cette étude, le semi- conducteur ZnCo2O4 a été synthétisé et caractérisé au niveau de ses propriétés optiques (E g =2,09V), électriques (E a =0,18eV) et électrochimiques (V bp =-0,12V) afin d’établir son diagramme énergétique pour comprendre le mécanisme de la photo dégradation fournissant ainsi une base solide pour son application comme un photo catalyseur. L’étude paramétrique de la dégradation du colorant nous a permis d’optimiser les conditions opératoires pour atteindre le meilleur rendement de la décoloration sous soleil sachant que la photo dégradation a été étudiée dans les cas suivants : système seul (ZnCo 2 O 4 ) et système en l’hétérojonction (ZnCo2O4 -ZnO). Les résultats obtenus ont montré que le système en hétérojonction 50%ZnO-50% ZnCo2O4 présente une activité photo catalytique élevée soit 75.43%.
Citation
Meriem Imane KHALED , Abdelhakim KHENICHE , Serine ARIS , Trari Mohammed, Grissi Khadidja, ,(2023-12-03), TRAITEMENT D’UN COLORANT PAR PHOTOCATALYSE HETEROGENE D’UNE SPINELLE SOUS ENERGIE SOLAIRE,the 2nd STUDY DAY ON MATERIALS : SYNTHESIS AND ENERGY APPLICATIONS,University of Mohamed Khider Biskra
- 2023-12-02
-
2023-12-02
CHARACTERIZATION OF A NANOCOMPOSITE AND ELECTROLYTE MEMBRANE FOR A BATTERY
Because of the industrial needs for materials with particular properties, available and less expensive, researchers' investigations are oriented towards polymers and in particular those with functional properties such as ferroelectricity or piezoelectricity, electrical conductivity, as well as polymers with liquid crystals and bioactive. In order to make the characteristics of these polymers known to a wide audience, we have carried out a structural analysis which concerns one which presents remarkable chemical and electrical properties. Poly (vinylidene fluoride) (PVDF) is one of the best polymers whose dielectric and piezoelectric properties are remarkable, the latter essentially depending on the existence of polar crystal structures. This makes it a model semi-crystalline polymer for studying the thermal behavior of its relationship with their structural organization. As part of this work, we developed nano-composites based on polyvinylidene fluoride (PVDF) and a lithium perchlorate filler (LiClO4). This work was devoted to developing nanocomposite mixtures by solution route. The membranes obtained were then characterized by FTIR spectroscopy and ATG thermogravimetric analysis. These different techniques made it possible to demonstrate the presence and dispersion of LiClO4 in the polymer matrix.
Citation
Serine ARIS , ,(2023-12-02), CHARACTERIZATION OF A NANOCOMPOSITE AND ELECTROLYTE MEMBRANE FOR A BATTERY,The 1st National Conference on Physics and it's Applications,ENS, Bousaada, Algeria
- 2023-12-02
-
2023-12-02
Les propriétés mécaniques d'un composite polyester insaturé renforcé de fibres halfa sont examinées en relation avec l'ajout de poudre de marbre et son traitement chimique
La matrice en polyester insaturé a été renforcée avec des fibres Alfa et traitée avec du marbre comme additif tout au long de la préparation du composite. Améliorer les qualités mécaniques de ce composite est l'objectif de cette recherche. Des qualités physiques et chimiques élevées qui sont abondantes dans la nature, telles que la légèreté, la biodégradabilité et le prix abordable, définissent les fibres de luzerne. Les fibres végétales pouvaient rivaliser avec les fibres synthétiques grâce à ces qualités. Pour améliorer la surface des fibres Alfa, nous les avons traitées pendant 24 heures avec du benzoyle, 0,2 % de permanganate et 9 % de soude, puis les avons passées au micro-ondes pendant 10 minutes. Par rapport aux fibres non traitées, les propriétés mécaniques du composite et des fibres se sont améliorées après avoir été traitées avec de la soude à une concentration de 9% pendant 24 heures, selon les résultats des tests effectués sur le matériau. Des traitements supplémentaires ont démontré que l’ajout de marbre améliorait considérablement le comportement mécanique. Cette étude a utilisé des essais de traction et la spectroscopie infrarouge comme outils de diagnostic.
Citation
Serine ARIS , azzedine benyahia, nadir deghfel, ,(2023-12-02), Les propriétés mécaniques d'un composite polyester insaturé renforcé de fibres halfa sont examinées en relation avec l'ajout de poudre de marbre et son traitement chimique,The 1st National Conference on Physics and it's Applications,ENS, Bousaada, Algeria
- 2023-11-29
-
2023-11-29
Synthesis, Characterization, DFT Mechanistic Study, Antimicrobial Activity of the nitrogen heterocyclic derivatives
The experiment is a straight way to obtain the activity/propriety data of organic compounds. Such experiments may be deficient in requiring various samples, costing much money, and taking much time as well as different measured values used by different researchers. Consequently, it would be almost impossible for these experiments to provide the activity values of all organic compounds. It is therefore essential to use theoretical methods to make up for the disadvantages of the experiment and to predict the exact data of compounds.1 his work is divided into three stages, The first part focuses on the study of the reduction of the isomers (Z)-(3-nitro-2-pyridyl) pyruvate of dialkyls by catalytic hydrogenation and a reduction by catalytic heating in the presence of sodium dithionite.2,3 The various physical analysis methods characterized the synthesized products. These included Fourier transform infrared spectroscopy (FT-IR) spectroscopy (FT-IR), nuclear magnetic resonance spectroscopy (NMR) of the proton 1H proton and 13C carbon, and mass spectrometry, revealing the appropriate functional groups, The second part is to get more light on the synthesis of new hybrid compounds, mechanistic studies were performed using DFT calculations with B3LYP/6-31G(d,p) basis set, The last part focuses on the biological activity using the quantitative structure activity/propriety relationship QSAR/QSPR methods, This is used to examine the relationship between molecular descriptors of compounds and their biological activity or physicochemical propriety.4
Citation
Serine ARIS , soumya fadli, ,(2023-11-29), Synthesis, Characterization, DFT Mechanistic Study, Antimicrobial Activity of the nitrogen heterocyclic derivatives,The Second National Seminar on Chemistry and its Applications (NSCA-2-2023),Batna, Algeria
- 2023-11-26
-
2023-11-26
L'effet du traitement chimique et de l'ajout de poudre de marbre sur les propriétés mécaniques d'un composite polyester insaturé renforcé de fibres halfa
Le composite a été préparé en utilisant des fibres Alfa comme renfort de la matrice de polyester insaturée et du marbre comme additif. L’objectif de cette étude est d’améliorer les propriétés mécaniques de ce composite. Les fibres Alfa sont caractérisées par des propriétés physiques et chimiques élevées qui sont abondantes dans la biodégradabilité légère de la nature et à faible coût ces propriétés rendent les fibres végétales compétitives avec les fibres synthétiques dans la préparation de composites, pour améliorer la surface des fibres Alfa que nous avons traitées avec du benzoyle, permanganate 0,2 %, soude 9 % pendant 24 h et mise au micro-ondes pendant 10 min. Les résultats des essais effectués sur le composite et la fibre ont montré que le traitement à la soude à une concentration de 9 % à 24 h avait un effet sur l’amélioration des propriétés mécaniques de la D’autres traitements ont également prouvé que le marbre ajouté avait un effet significatif sur l’amélioration du comportement mécanique. Parmi les tests de diagnostic utilisés dans cette étude sont la spectroscopie infrarouge, test de traction.
Citation
Serine ARIS , azzedine benyahia, nadir deghfel, chouki farsi, ,(2023-11-26), L'effet du traitement chimique et de l'ajout de poudre de marbre sur les propriétés mécaniques d'un composite polyester insaturé renforcé de fibres halfa,First National Conference on Saharan Agriculture Challenges and Possibilities,El Oued, Algeria
- 2023-11-22
-
2023-11-22
DEVELOPMENT AND CHARACTERIZATION OF AN ELECTROLYTE MEMBRANE FOR AN ACCUMULATOR
The growth in energy consumption follows an exponential logic due to demographic explosions and the strong economic growth of developing countries. The world of scientific research aims to control clean, renewable and recyclable resources and energies on a planetary scale, with the aim of gradually reducing dependence on fossil fuels, within the framework of As part of this work, we developed nano-composites based on polyvinylidene fluoride (PVDF) and a lithium perchlorate filler (LiClO4). This work was devoted to the development of nanocomposite mixtures by applied routes (reverse phase route). The membranes obtained were then characterized by scanning enthalpy calorimetry (DSC) and by TGA thermogravimetric analysis and measurement of electrical conductivity by the four-point method. These different techniques made it possible to demonstrate the presence and dispersion of LiClO4 in the polymer matrix.
Citation
Serine ARIS , ADMIN Admin , ,(2023-11-22), DEVELOPMENT AND CHARACTERIZATION OF AN ELECTROLYTE MEMBRANE FOR AN ACCUMULATOR,The First National Conference Of Materials Sciences And Renewable Energy,Relizane, Algeria
- 2023-11-22
-
2023-11-22
L'effet du traitement chimique sur la structure morphologique des fibres végétales
Les fibres naturelles sont connues depuis longtemps et sont utilisées comme renfort dans la fabrication de matériaux composites[1-3]. En particulier, dans le domaine de l'emballage, de la santé, de la pharmacie, de la construction automobile et dans le domaine aéronautique [4]. Les fibres naturelles présentent de nombreux avantages tels que; disponibilité, faible coût, faibles densités, rigidité, biodégradabilité et ont un comportement mécanique important . De nombreux chercheurs ont observé que la préparation de matériaux composites renforcés de fibres naturelles peut améliorer l'efficacité mécanique de ces composites . Laib et al. [5] ont préparé un matériau composite à partir d'une matrice de polyester insaturé avec des fibres de Luffa, qui a subi différents traitements chimiques (NaOH, permanganate, dichromate, silane et eau de Javel) afin d'améliorer l'adhérence inter faciale fibre-matrice. L'objectif de ce manuscrit est d’étudier l'effet d'un traitement alcalin et du temps de traitement sur les propriétés mécaniques d'un matériau composite à base d'une matrice thermodurcissable (polyester insaturé) renforcé de fibres Alfa.
Citation
Serine ARIS , nouri laib, azzedine benyahia, nadir deghfel, ,(2023-11-22), L'effet du traitement chimique sur la structure morphologique des fibres végétales,Le 1er Workshop virtuel sur Contribution de L'ELECTROCHIMIE dans l'économie circulaire,Boumerdes, Algeria
- 2023-10-23
-
2023-10-23
Effect of chemical treatment on mechanical properties of Alfa fiber/Unsaturated polyester composite
Environmental and energy conservation pressure has led to a dramatic increase in the need for economically feasible lightweight materials that can be better substituted for non-biodegradable materials in reinforced composites. To this end, this study examines composite materials prepared from unsaturated polyester resins reinforced with treated and untreated Alfa fibers. Fiber treatment was carried out by NaOH solution of 5 % concentration at different times (1, 3, 5 and 24 h). The strength and flexural modulus of the composites were evaluated according to the ASTM D790 test method. The analytical results indicate that the fibers’ alkaline pretreatment time had a positive influence on the mechanical properties of the composites.
Citation
Serine ARIS , ,(2023-10-23), Effect of chemical treatment on mechanical properties of Alfa fiber/Unsaturated polyester composite,1st International Seminar on Chemical Processes and Sustainable Development (ISCPSD' 23),Skikda , Algeria