DJAMELEDDINE Djafar
جمال الدين جعفر
djameleddine.djafar@univ-msila.dz
0 669 83 95 16
- DEPARTEMENT OF: ELECTRICAL ENGINEERING
- Faculty of Technology
- Grade PHd
About Me
Location
Msila, Msila
Msila, ALGERIA
Code RFIDE- 1988-04-12 00:00:00
-
DJAMELEDDINE Djafar birthday
- 2019
-
2019
Comparative Analysis between the Rotor Flux Oriented Control and Sliding Mode Control of a Induction Motor With Broken Rotor Bars
The traditional control of induction motor is not enough, because it lacks robustness, especially when the demand for accuracy and other dynamic characteristics of the system are of better performances in nowadays industry. But induction may face some disturbances, such as: electrical and mechanical faults as : broken bars Many researchers have proposed several techniques for achieving good performance of the induction motors, Sliding mode control is one of the methodologies, that recently have become the main operational mode. The paper will Comparative Analysis between the Field-Oriented Control and Sliding Mode Control applied upon inductions motors under the effect of broken bars rotor, and load torque variation, the simulation is implemented using MATLAB/ SIMULINK, the performance of the system is illustrated through simulation.
Citation
djameleddine djafar , SAAD BELHAMDI , ,(2019), Comparative Analysis between the Rotor Flux Oriented Control and Sliding Mode Control of a Induction Motor With Broken Rotor Bars,The First International Conference on Materials, Environment, Mechanical and Industrial Systems ICMEMIS’19,djelfa
- 2018
-
2018
Speed control of induction motor with broken bar using sliding mode control (SMC) based to on type-2fuzzy logic controller (T2FLC)
The traditional control of induction motor is not enough, because it lacks robustness, especially when the demand for accuracy and other dynamic characteristics of the system are of better performance in nowadays industry. One of the most spreader problems of the induction motor that limits the performance of the speed control is the broken rotor bars. For Improving performance of the induction motor of broken rotor bars, sliding mode control based on fuzzy logic type-2 is analyzed within this research paper. Fuzzy logic is one of the methods that relay on artificial intelligence, and which does not require a mathematical model of the system as the traditional control does. Artificial intelligence is the most used one, especially when it comes to non-linear systems as the motor drive one.
Citation
djameleddine djafar , SAAD BELHAMDI , , (2018), Speed control of induction motor with broken bar using sliding mode control (SMC) based to on type-2fuzzy logic controller (T2FLC), Advances in Modelling and Analysis C, Vol:73, Issue:4, pages:197-201, Advances in Modelling and Analysis C
- 2018
-
2018
Sliding Mode Control for Speed of an Induction Motor with Broken Rotor Bars
The traditional control of induction motor is not enough, because it lacks robustness, especially when the demand for accuracy and other dynamic characteristics of the system are of better performances in nowadays industry. But induction may face some disturbances, such as: electrical and mechanical faults as : broken bars Many researchers have proposed several techniques for achieving good performance of the induction motors, Sliding mode control is one of the methodologies, that recently have become the main operational mode. The paper will analyse the control of sliding mode applied upon inductions motors under the effect of broken bars rotor, and load torque variation, the simulation is implemented using MATLAB/ SIMULINK, the performance of the system is illustrated through simulation.
Citation
djameleddine djafar , SAAD BELHAMDI , ,(2018), Sliding Mode Control for Speed of an Induction Motor with Broken Rotor Bars,Second Intternational Conference On Electrical Engineering ICEEB 18,Biskra