SAAD Belhamdi
بلحمدي ساعد
saad.belhamdi@univ-msila.dz
06 68307093
- DEPARTEMENT OF: ELECTRICAL ENGINEERING
- Faculty of Technology
- Grade Prof
About Me
Habilitation Universitaire en Electrotechnique:. in universite de m'sila
Research Domains
control induction motor with broken bars fuzzy logic type1&2
LocationMsila, Msila
Msila, ALGERIA
Code RFIDE- 2019
-
Licence
BOUDINA Ibrahim , ,TOUMI Sarra, ZIANE Besma
Modélisation et simulation d'un moteur Asynchrone double alimentation
- 2018
-
master
HAMZA Oussama , BERRABAH Ahmed Bahaeddine
Commande par logique flou d’un moteur synchrone à aimant permanent
- 2017
-
master
BOUDJELLAL Hamza , BERBACHE Yahia
Commande non linéaire robuste d’un moteur à induction en tenant compte des défauts rotoriques
- 2017
-
master
BOUDJELLAL Hamza , BERBACHE Yahia
Commande non linéaire robuste d’un moteur à induction en tenant compte des défauts rotoriques
- 2017
- 2016
- 2016
- 2015
-
master
DRIDI Mabrouk
Commandes non linéaires des Machine asynchrone en présence des barres cassées
- 2015
-
master
BENSAOUCHA Saddam
Commande par PI flou des MAS en tenant Comptes des défauts rotoriques
- 2014
-
master
belouadah djamel eddine
Etude de la Commande des Machines Asynchrones à haut Rendement (HEM)
- 2013
- 2013
- 2010
-
Engineer
DEGHNOUCHE Imad-Eddine , HELLALI Lallouani, MOUSSA Oussama
COMMANDE PAR "PI" D’UNE MACHINE ASYNCHRONE AVEC CASSURE DES BARRES ROTORIQUES
- 23-05-2016
- 08-05-2014
-
Doctorat en Electrotechnique option: électricité industrielle,
Diagnostic des défauts de la machine asynchrone contrôlée par déférentes technique de commande. - 05-10-2005
-
Magister en Science en Electrotechnique:
Prise en compte d'un défaut rotorique dans la commande d'un moteur asynchrone - 1976-08-23 00:00:00
-
SAAD Belhamdi birthday
- 2020
-
2020
TP-EPA
- 2020
-
2020
PERFORMANCES OF TYPE 2 FUZZY LOGIC CONTROL BASED ON DIRECT TORQUE CONTROL FOR DOUBLE STAR INDUCTION MACHINE
MASDE Fuzzy logic type2
Citation
SAAD BELHAMDI , , (2020), PERFORMANCES OF TYPE 2 FUZZY LOGIC CONTROL BASED ON DIRECT TORQUE CONTROL FOR DOUBLE STAR INDUCTION MACHINE, Revue roumaine des sciences techniques Série Électrotechnique et Énergétique, Vol:65, Issue:1, pages:103-108, http://revue.elth.pub.ro/index.php?action=main&year=2020&issue=1-2
- 2019
-
2019
"DTC-SVM based on Interval Type-2 Fuzzy Logic Controller of Double Stator Induction Machine fed by Six-Phase Inverter".
The main disadvantage of the classical direct torque control is high torque and flux ripples. This is due to hysteresis comparators suffer from a variable switching frequency and a high torque ripple. Besides, a hybrid strategy; Direct Torque Control with Space Vector Modulation (DTC -SVM) is established using Interval Type-2 Fuzzy Logic Controller (IT2FLC) for enhancing control performance parameters to reducing torque and flux ripple. In this work, a IT2FLC is applied to the DTC- SVM of Double Stator Induction Machine (DSIM). Simulation results are shown to present the robustness .
Citation
SAAD BELHAMDI , , (2019), "DTC-SVM based on Interval Type-2 Fuzzy Logic Controller of Double Stator Induction Machine fed by Six-Phase Inverter"., International Journal of Image, Graphics and Signal Processing (IJIGSP), Vol:11, Issue:7, pages:48-57, .(http://www.mecs-press.org/).
- 2019
-
2019
Adaptive structure based on Fuzzy Logic type-2 for controlling the speed of induction motors with broken bars
— The traditional control of induction motor is not enough, because it lacks robustness, especially when the demand for accuracy and other dynamic characteristics of the system are of better performances in nowadays industry. But induction may face some disturbances, such as: electrical and mechanical faults as : broken bars Many researchers have proposed several techniques for achieving good performance of the induction motors, Sliding mode control is one of the methodologies, that recently have become the main operational mode. The paper will Comparative Analysis between the Field-Oriented Control and Sliding Mode Control applied upon inductions motors under the effect of broken bars rotor, and load torque variation, the simulation is implemented using MATLAB/ SIMULINK, the performance of the system is illustrated through simulation.
Citation
SAAD BELHAMDI , ,(2019), Adaptive structure based on Fuzzy Logic type-2 for controlling the speed of induction motors with broken bars,Second International Conference On Electrical Engineering .,djelfa
- 2019
-
2019
TP ELT-2
machine electrique a c.c ,synchrone et asynchrone
Citation
SAADBELHAMDI , ,(2019); TP ELT-2,univ M'sila,
- 2019
-
2019
Comparative Analysis between the Rotor Flux Oriented Control and Sliding Mode Control of a Induction Motor With Broken Rotor Bars
The traditional control of induction motor is not enough, because it lacks robustness, especially when the demand for accuracy and other dynamic characteristics of the system are of better performances in nowadays industry. But induction may face some disturbances, such as: electrical and mechanical faults as : broken bars Many researchers have proposed several techniques for achieving good performance of the induction motors, Sliding mode control is one of the methodologies, that recently have become the main operational mode. The paper will Comparative Analysis between the Field-Oriented Control and Sliding Mode Control applied upon inductions motors under the effect of broken bars rotor, and load torque variation, the simulation is implemented using MATLAB/ SIMULINK, the performance of the system is illustrated through simulation.
Citation
djameleddine djafar , SAAD BELHAMDI , ,(2019), Comparative Analysis between the Rotor Flux Oriented Control and Sliding Mode Control of a Induction Motor With Broken Rotor Bars,The First International Conference on Materials, Environment, Mechanical and Industrial Systems ICMEMIS’19,djelfa
- 2019
-
2019
Reliability Comparison Between Standard and High Efficiency Induction Motor Using Vector Control Method
Recently, the induction motor comprises the majority of all motors utilized in machinery, and the operating efficiencies of these machines greatly impact the overall energy consumption in industry. Current motors are produced with higher efficiency ratings than standard motors, but the decision to replace an existing motor focuses on the actual cost savings that depend on several key points such as operating efficiency, percentage of time at given loads. Owing to the importance of induction motors, this work investigates vector control of a high efficiency induction motor (HEM). Most papers related to control concentrate on flux oriented for solving the problem of voltage and power limitations of two-level inverters. A simulation model is implemented to compare the performance of the first and the second motor. The comparison includes speed performance, torque and current. Through which finally we can declared that, they found results are satisfactory
Citation
Mohamed Lamine Boubakri , SAAD BELHAMDI , salim.chakroun@univ-sila.dz, , (2019), Reliability Comparison Between Standard and High Efficiency Induction Motor Using Vector Control Method, AMSE, Vol:92, Issue:1, pages:14, IIETA
- 2019
-
2019
A Fuzzy Model Feed Forward Predictive Control of the Nonlinear Tubular Solid-Oxide Fuel Cell System
The solid oxide fuel cell (SOFC) is broadly used for distributed and clean power generation. The main problem related to SOFC lies in the difficulties to control the output voltage of the SOFC due to the strong nonlinearity, the rapid changes of the load and the limited fuel flow. The objective of the control of the SOFC system is to maintain the output voltage at a constant level and the fuel utilization rate in a safety interval. In this context, a multiple-input multiple-output (MIMO) discrete-time Takagi-Sugeno (TS) fuzzy dynamic model with feed forward input is used in this paper to describe the dynamic properties of the nonlinear voltage and the fuel utilization rate in a tubular SOFC system. This obtained fuzzy model will be used for the application of constrained fuzzy model predictive control. The simulation results are provided to show the accuracy and the effectiveness of the proposed strategy.
Citation
FAYSSAL Ouagueni , SAAD BELHAMDI , Boumehrez Mohamed, , (2019), A Fuzzy Model Feed Forward Predictive Control of the Nonlinear Tubular Solid-Oxide Fuel Cell System, Advances in modelling and analysis C, Vol:74, Issue:4, pages:71-79, IIETA
- 2018-12-20
-
2018-12-20
Multi Objective Design of High Efficiency Induction Motor Using an Analytical Method's
In the final decade of the last century, there was enormous intellectual and engineering activity surrounding the recently invented induction motor, especially their efficiency increasing. The interest in improving the efficiency of electric motors stems from the fact that they represent 60 to 70% of the total industrial and commercial load. A knowledge the motors operating efficiency in an industrial plant is necessary, when deciding whether standard motors should be advantageously replaced with more efficient motors. A new approach is presented for analysis and design of closed rotor slot induction motors in this paper. The main idea is illustrated as follows: first based the computed machine parameters and motor geometry optimization will be carried out. Then, to validate the conceived machines, dynamical performance analysis will be achieved by MATLAB environment. Finally using finite element electromagnetic field analysis, the comparison results will be discussed and commented.
Citation
Oussama Zeghba , Salim CHAKROUNE , SAAD BELHAMDI , , (2018-12-20), Multi Objective Design of High Efficiency Induction Motor Using an Analytical Method's, Modelling, Measurement and Control A, Vol:91, Issue:4, pages:202-211, IIETA
- 2018
-
2018
Speed control of doubly star induction motor (DSIM) using direct field oriented control (DFOC) based on fuzzy logic controller (FLC)"
The aim for this paper is a proportional and integral (PI) controller and fuzzy logic (FLC) controller devoted to improve the performance of Direct field orient control (DFOC) strategy of doubly star induction motor (DSIM) fed by two inverters. In addition, the paper describes a model of doubly star induction motor in d-q reference frame theory and its computer simulation in MATLAB/SIMULINK®, fed by Pulse Width Modulation (PWM) inverter to be studied. The performance of the Direct Field orientated control with a PI and FLC is tested under different speed command and load disturbances. And also show a better robustness beside the parametric variations of the motor.
Citation
SAAD BELHAMDI , , (2018), Speed control of doubly star induction motor (DSIM) using direct field oriented control (DFOC) based on fuzzy logic controller (FLC)", Advances in Modelling and Analysis C, Vol:73, Issue:4, pages:128-136, http://iieta.org/Journals/AMA/AMA_C.
- 2018
-
2018
Speed control of induction motor with broken bars using sliding mode control (SMC) based to on type-2 fuzzy logic controller (T2FLC)"
The traditional control of induction motor is not enough, because it lacks robustness, especially when the demand for accuracy and other dynamic characteristics of the system are of better performance in nowadays industry. One of the most spreader problems of the induction motor that limits the performance of the speed control is the broken rotor bars. For Improving performance of the induction motor of broken rotor bars, sliding mode control based on fuzzy logic type-2 is analyzed within this research paper. Fuzzy logic is one of the methods that relay on artificial intelligence, and which does not require a mathematical model of the system as the traditional control does. Artificial intelligence is the most used one, especially when it comes to non-linear systems as the motor drive one.
Citation
SAAD BELHAMDI , , (2018), Speed control of induction motor with broken bars using sliding mode control (SMC) based to on type-2 fuzzy logic controller (T2FLC)", Advances in Modelling and Analysis C, Vol:73, Issue:4, pages:197-201, http://iieta.org/Journals/AMA/AMA_C.
- 2018
-
2018
Direct Torque Control o Doubly Star Induction Motor Using Fuzzy Logic Speed Controller"
the paper an analysis of the Direct Field Control Fuzzy logic type-2 of induction motor drive with broken rotor bars is presented. The simplicity of traditional regulators makes them popular and the most used solution in the nowadays industry. However, they suffer from some limitations and cannot deal with nonlinear dynamics and system parameters variation. In the literature, several strategies of adaptation are developed to alleviate these limitations. Artificial intelligent has found high application in most nonlinear systems same as motors drive. Because it has intelligence like human but there are no sentimental against human like angriness and.... Artificial intelligent is used for various points like approximation, control, and monitoring. Because artificial intelligent techniques can use as controller for any system without requirement to system mathematical model, it has been used in electrical drive control. With this manner, efficiency and reliability of drives increase and volume, weight and cost of them decrease.
Citation
SAAD BELHAMDI , , (2018), Direct Torque Control o Doubly Star Induction Motor Using Fuzzy Logic Speed Controller", International Journal of Artificial Intelligence., Vol:7, Issue:1, pages:42-53, International Journal of Artificial Intelligence.
- 2018
-
2018
Multi objective design of high efficiency induction motor using an analytical method's"
In the final decade of the last century, there was enormous intellectual and engineering activity surrounding the recently invented induction motor, especially their efficiency increasing. The interest in improving the efficiency of electric motors stems from the fact that they represent 60 to 70% of the total industrial and commercial load. A knowledge the motors operating efficiency in an industrial plant is necessary, when deciding whether standard motors should be advantageously replaced with more efficient motors. A new approach is presented for analysis and design of closed rotor slot induction motors in this paper. The main idea is illustrated as follows: first based the computed machine parameters and motor geometry optimization will be carried out. Then, to validate the conceived machines, dynamical performance analysis will be achieved by MATLAB environment. Finally using finite element electromagnetic field analysis, the comparison results will be discussed and commented.
Citation
SAAD BELHAMDI , , (2018), Multi objective design of high efficiency induction motor using an analytical method's", Modeling, Measurement and Control, Vol:91, Issue:4, pages:202-211, " http://iieta.org/Journals/MMC/MMC_A
- 2018
-
2018
Comparative Analysis between the Rotor Flux Oriented Control and Sliding Mode Control of a Induction Motor With Broken Rotor Bars
This paper presents the design and simulation of adaptive control system based on an Interval Type-2. Fuzzy Logic Controller (IT2FLC) for control of induction motor with broken bars. Type 2 fuzzy logic systems have recently been utilized in many control processes due to their ability to model uncertainty, so we are concerned with the use of a new adaptive fuzzy PI controller to improve the performance of conventional PI controller. The entire system has been modeled using MATLAB R11a. Electric motors are essential components in most industrial processes. Induction motors are increasingly replacing more DC motors in applications industrial. A high performance usually requires a good control system response regulation and prosecution, which is insensitive to changes in operating conditions and process parameters. In recent decades, several advanced control methods have been developed that are applicable for controlling Inductions motors. However, the control system performance with the Induction motor has not been provided because of the complexity of the control algorithms and highly non-linear characteristics of Induction motor. The fuzzy inference system is created and rule base are evaluated relating the parameters to the type of the faults. These rules are fired for specific changes in system parameters and the faults are diagnosed. The feasibility of fuzzy based fault diagnosis and control scheme is demonstrated by applying it to a simulated system.
Citation
SAAD BELHAMDI , ,(2018), Comparative Analysis between the Rotor Flux Oriented Control and Sliding Mode Control of a Induction Motor With Broken Rotor Bars,International Conference on Mechanics and Energy,djelfa
- 2018
-
2018
"fuzzy sliding mode speed controller design of induction motor drives with broken bars"
— The traditional control of induction motor is not enough, because it lacks robustness, especially when the demand for accuracy and other dynamic characteristics of the system are of better performances in nowadays industry. But induction may face some disturbances, such as: electrical and mechanical faults as : broken bars Many researchers have proposed several techniques for achieving good performance of the induction motors, Sliding mode control is one of the methodologies, that recently have become the main operational mode. The paper will analyse the control of sliding mode applied upon inductions motors under the effect of broken bars rotor, and load torque variation, the simulation is implemented using MATLAB/ SIMULINK, the performance of the system is illustrated through simulation.
Citation
SAAD BELHAMDI , ,(2018), "fuzzy sliding mode speed controller design of induction motor drives with broken bars",ICEEB,biskra
- 2018
-
2018
Multi objective design of high efficiency induction motor using an analytical method's
In the final decade of the last century, there was enormous intellectual and engineering activity surrounding the recently invented induction motor, especially their efficiency increasing. The interest in improving the efficiency of electric motors stems from the fact that they represent 60 to 70% of the total industrial and commercial load. A knowledge the motors operating efficiency in an industrial plant is necessary, when deciding whether standard motors should be advantageously replaced with more efficient motors. A new approach is presented for analysis and design of closed rotor slot induction motors in this paper. The main idea is illustrated as follows: first based the computed machine parameters and motor geometry optimization will be carried out. Then, to validate the conceived machines, dynamical performance analysis will be achieved by MATLAB environment. Finally using finite element electromagnetic field analysis, the comparison results will be discussed and commented.
Citation
oussama zaghba , Salim CHAKROUNE , SAAD BELHAMDI , , (2018), Multi objective design of high efficiency induction motor using an analytical method's, AMSE, Vol:91, Issue:4, pages:202-211, iieta
- 2018
-
2018
Speed control of induction motor with broken bar using sliding mode control (SMC) based to on type-2fuzzy logic controller (T2FLC)
The traditional control of induction motor is not enough, because it lacks robustness, especially when the demand for accuracy and other dynamic characteristics of the system are of better performance in nowadays industry. One of the most spreader problems of the induction motor that limits the performance of the speed control is the broken rotor bars. For Improving performance of the induction motor of broken rotor bars, sliding mode control based on fuzzy logic type-2 is analyzed within this research paper. Fuzzy logic is one of the methods that relay on artificial intelligence, and which does not require a mathematical model of the system as the traditional control does. Artificial intelligence is the most used one, especially when it comes to non-linear systems as the motor drive one.
Citation
djameleddine djafar , SAAD BELHAMDI , , (2018), Speed control of induction motor with broken bar using sliding mode control (SMC) based to on type-2fuzzy logic controller (T2FLC), Advances in Modelling and Analysis C, Vol:73, Issue:4, pages:197-201, Advances in Modelling and Analysis C
- 2018
-
2018
Sliding Mode Control for Speed of an Induction Motor with Broken Rotor Bars
The traditional control of induction motor is not enough, because it lacks robustness, especially when the demand for accuracy and other dynamic characteristics of the system are of better performances in nowadays industry. But induction may face some disturbances, such as: electrical and mechanical faults as : broken bars Many researchers have proposed several techniques for achieving good performance of the induction motors, Sliding mode control is one of the methodologies, that recently have become the main operational mode. The paper will analyse the control of sliding mode applied upon inductions motors under the effect of broken bars rotor, and load torque variation, the simulation is implemented using MATLAB/ SIMULINK, the performance of the system is illustrated through simulation.
Citation
djameleddine djafar , SAAD BELHAMDI , ,(2018), Sliding Mode Control for Speed of an Induction Motor with Broken Rotor Bars,Second Intternational Conference On Electrical Engineering ICEEB 18,Biskra
- 2017
-
2017
Control of induction motor using fuzzy logic type-2 with broken bar"
Because of the low maintenance and robustness induction motors have many applications in the industries. Fuzzy logic type-2 Controller is designed for the speed loop of the drive. The motor model is designed and membership functions are chosen according to the parameters of the motor model. The simulated design is tested using various tool boxes in MATLAB. The result concludes that the efficiency and reliability of the proposed speed controller is good.
Citation
SAADBELHAMDI , ,(2017); Control of induction motor using fuzzy logic type-2 with broken bar",," LAP LAMBERT Academic Publishing
- 2017
-
2017
fuzzy sliding mode speed controller design of induction motor drives with broken bars"
Because of the low maintenance and robustness induction motors have many applications in the industries. Fuzzy Sliding Mode Controller (FSMC) is designed for the speed loop of the drive. The motor model is designed and membership functions are chosen according to the parameters of the motor model. The simulated design is tested using various tool boxes in MATLAB. The result concludes that the efficiency and reliability of the proposed speed controller is good.
Citation
SAAD BELHAMDI , , (2017), fuzzy sliding mode speed controller design of induction motor drives with broken bars", Advances in Modelling and Analysis C, Vol:72, Issue:4, pages:203-212, http://iieta.org/Journals/AMA/AMA_C.
- 2014
-
2014
Study on Fuzzy Control Type-2 of Induction Machine with broken bars Faults Using Direct Torque Control Approach
induction motor with broken bars DTC
Citation
SAAD BELHAMDI , , (2014), Study on Fuzzy Control Type-2 of Induction Machine with broken bars Faults Using Direct Torque Control Approach, the Mediterranean Journal of Measurement and Control,, Vol:10, Issue:4, pages:10-16, the Mediterranean Journal of Measurement and Control
- 2013
-
2013
Fuzzy logic Control of Asynchronous Machine Presenting Defective Rotor Bars"
fuzzy logic induction motor with broken bars
Citation
SAAD BELHAMDI , , (2013), Fuzzy logic Control of Asynchronous Machine Presenting Defective Rotor Bars", Advances in Modelling and Analysis C, Vol:2013, Issue:68, pages:54-63, http://iieta.org/Journals/AMA/AMA_C.
- 2011
-
2011
Sliding Mode Control of Asynchronous Machine Presenting Defective Rotor Bars"
sliding mode control
Citation
SAAD BELHAMDI , , (2011), Sliding Mode Control of Asynchronous Machine Presenting Defective Rotor Bars", Advances in Modelling and Analysis C, Vol:66, Issue:2, pages:39-49, http://iieta.org/Journals/AMA/AMA_C.
- 2009
-
2009
Etude de l’effet de la position et du nombre de barres rotoriques défaillantes d'un moteur Asynchrone sur le spectre de son courant statorique
FFT Broken bars.Induction motor
Citation
SAAD BELHAMDI , , (2009), Etude de l’effet de la position et du nombre de barres rotoriques défaillantes d'un moteur Asynchrone sur le spectre de son courant statorique, Revue technologie, Vol:4, Issue:1, pages:12-23, http://www.enset-oran.dz/spip.php?article135