IMEN YAMINA Omri
ايمان يمينة عمري
imen.omri@univ-msila.dz
+213 669455594
- BASE COMMON ST Departement ST
- Faculty of Technology
- Grade PHd
About Me
Master Degree. in High School Othmen Ben Afan (M'sila)
DomainScience et Technologies
Research Domains
Civil Engineering (Materials)
FiliereGénie Civil
Materials
Location
Msila, Msila
Msila, ALGERIA
Code RFIDE- 28-06-2015
-
Master Degree
the effect of natural fibres treatment on polymer concrete damage - 25-07-2013
- 03-07-2010
- 1992-01-11 00:00:00
-
IMEN YAMINA Omri birthday
- 2024-12-17
-
2024-12-17
HOW TO RECYCLE INDUSTRIAL WASTE TO CREATE INNOVATIVE MATERIALS WITHOUT PORTLAND CEMENT.
In order to create a geopolymer or alkali activated material similar to cementitious materials for chemical and physical study as well as mechanical behavior, the majority of prior research on the terms alkaline and thermal activation was applied in the presence of cement as the main constituent and mixed with industrial waste such as (red brick, slag, ceramic and glass…etc). The solubility of aluminates-silicates can be facilitated by chemical solutions, such as KOH, NaOH and Na2SiO3 or Na2CO3, at varying concentrations. The effectiveness of these methods depends on the nature of the system (CaO-SiO2-Al2O3) in mineral residues. Additionally, there is the thermal method, which involves hardening the material at a temperature difference of 20°C to 80°C for a period of 24 to 48 hours. Studies and researchers have found that all these methods to protect the environment and give perfect solutions to recycler the maximum of the minerals waste for making the alternative binders.
Citation
imen yamina omri , ZINE EL ABIDINE Rahmouni , Seif Eddine KHADRAOUI , Nadia TEBBAL , ASSELI Aymen Elouanas, ,(2024-12-17), HOW TO RECYCLE INDUSTRIAL WASTE TO CREATE INNOVATIVE MATERIALS WITHOUT PORTLAND CEMENT.,The First National Congress On Civil Engineering and Housing of Constantine N2CEHC 2024,Mentouri University of Constantine
- 2024-11-10
-
2024-11-10
Characterization Using Non-Destructive Testing (NDT) of SelfCompacting Concrete Made with Recycled Aggregates and Silica Fume
This study was conducted to address two main concerns, the possibility of formulating Self-Compacting Concrete (SCC) using local materials (recycled aggregates) and the influence of silica fume and limestone fillers dosage on the rheological and mechanical behavior of self-compacting concrete. The objective of this work is to optimize the SCC mix design through the selection of additive type and proportion to improve the mechanical properties of self-compacting concrete (through destructive and non-destructive testing), while maintaining good rheological properties of SCC (filling ability, passing ability, and segregation resistance). The results obtained show that the use of silica fume alone or combined with limestone at a limited rate remarkably improves the performance of recycled SCC containing these additions compared to a control recycled concrete (without fillers).
Citation
imen yamina omri , Seif Eddine KHADRAOUI , Assli Aymen Elouanas, ,(2024-11-10), Characterization Using Non-Destructive Testing (NDT) of SelfCompacting Concrete Made with Recycled Aggregates and Silica Fume,3rd International Conference on Contemporary Academic Research ICCAR 2024,Konya, Turkey
- 2022
-
2022
Review about the effect of chemical activation of industrials waste which is rich by SiO2 and CaO
Most previous research on the term of alkaline and thermal activation, applied in the presence of cement as a main constituent, mixed with industrial waste like (fly ash, slag, glass…) by certain percentages to give a geopolymers or alkali-activated materials for studying the chemical and physical, as well as mechanical behaviour. These methods carried out by chemical solutions such as (NaOH, KOH, Na2CO3…) by different concentrations to facilitate the solubility of the aluminates-silicates, it’s depending on the nature of (CaO-SiO2-Al2O3) system in mineral residues, also there is the thermal method cured at a differents temperature between (20 °C and 100 °C) for 24 h that according to studies and researchers, all these methods to protect the environment from the emission of gaseous pollutants into the atmosphere.
Citation
ZINE EL ABIDINE Rahmouni , imen yamina omri , Nadia TEBBAL , , (2022), Review about the effect of chemical activation of industrials waste which is rich by SiO2 and CaO, Materials Today: Proceedings, Vol:49, Issue:4, pages:997-999, Sciences direct
- 2022
-
2022
Studying the effect of high temperature on the content of glass and brick waste binders after alkaline activation
The high-temperature mechanical behaviour of a glass and brick waste alkaline to synthesize geopolymer mortar was studied. The mortar in question contained 100% glass powder GWP and 90% of a blend of brick waste GBWP, brick waste BWP and a solid activator (10 mol concentration of NaOH mixed with glass water (Na2SiO3). The material was tested during exposure to high temperatures to establish its density, weight loss, compressive strength, accessible porosity in water, expansion of pastes, XRD and TG-DSC analysis using an innovative methodology to notch the hydrated geopolymers paste specimens after exposed to five maximum temperatures, 100℃, 200℃, 400℃, 600℃ and 800℃ without any imposed load during the heating. The results were found that GBWP gave better values in compressive strength, reaching 38.3 MPa at 100℃ and other proportional values at 400℃, 600℃ respectively compared with GWP. As for the density, the high temperature contributed to its decrease, which caused the presence of high porosity at 800℃. On the other hand, the high temperature helped to improve the mechanical and physical behavior of BWP, where the resistance reached 24.91 MPa at 200℃. In addition, for the microstructure and different particles related to the interactions were identified through the XRD and TG-DSC analysis procedure, in order to know the highest temperatures that allow changing the structure and properties of this type of alternative binders.
Citation
ZINE EL ABIDINE Rahmouni , imen yamina omri , Nadia TEBBAL , , (2022), Studying the effect of high temperature on the content of glass and brick waste binders after alkaline activation, Annales de chimie - Sciences des matériaux, Vol:46, Issue:3, pages:117-125, IIETA
- 2019
-
2019
The Effect Of Chemical Treatment Of Vegetable Fibres On The Mechanical Behavior Of a Polymer Concrete
the objective of this work is the valorization of natural resources such as vegetable fibers incorporated as reinforcement in polymer concrete, this in order to reduce the environmental impact and improve the mechanical behavior of concrete. In the present study, we have experienced the effect of reinforcing polymer concrete by two types of vegetable fibers (Doum fibers and Alfa fibers). The influence of chemical treatment of vegetable fibers treated with 2% NaOH solution on the static behavior of polymer concrete is also discussed. The test results of the different polymer concrete specimens reinforced by these fibers showed that the alkaline treatment of plant fibers had a significant effect on the three-point bending behavior, and failure mode. The results of this study suggest that Doum fibers are comparable to other natural fibers used as reinforcement in polymer matrices. They could be suitable for use as reinforcement in polymer concretes.
Citation
imen yamina omri , ,(2019), The Effect Of Chemical Treatment Of Vegetable Fibres On The Mechanical Behavior Of a Polymer Concrete,International Seminar In Industrial Engineering And Applied Mathematics (ISIEAM' 2018),University 20 Aout 1955 (Skikda)
- 2019
-
2019
CARACTERISATION AU MOYENS DES ESSAIS NON DESTRUCTIFS (NDT) D’UN BAP A BASE DES GRANULATS RECYCLES ET FUMEE DE SILICE
Cette étude a été menée pour répondre à deux préoccupations principales, la possibilité de formuler des BAP à base des matériaux locaux (granulats recyclés) et l’influence du dosage d’une addition de fumée de silice et fillers calcaire sur le comportement rhéologique et mécanique des bétons autoplaçants. L’objectif de ce travail, est d’optimiser la formulation du BAP, par le choix du type et la proportion de l’ajout afin d’améliorer les propriétés mécaniques du béton autoplaçants (essais destructifs et essais non-destructifs), en même temps de garder les bonnes propriétés rhéologiques du BAP (capacités de remplissage, de passage et la résistance à la ségrégation). Les résultats obtenus montrent que l’utilisation de la fumée de silice seul ou combiné avec du calcaire à un taux limité améliore la performance d’une façon remarquable des BAP recyclés à base de ces ajouts par rapport à un béton recyclé témoin (sans fillers). Mots clés : béton autoplaçant (BAP), granulats recyclés, fumée de silice, fillers de calcaire, propriétés rhéologiques, résistance mécanique.
Citation
Larbi BELAGRAA , ibtissem allali , imen yamina omri , Berra Manel, ,(2019), CARACTERISATION AU MOYENS DES ESSAIS NON DESTRUCTIFS (NDT) D’UN BAP A BASE DES GRANULATS RECYCLES ET FUMEE DE SILICE,The 1st International Congress on Advances in Geotechnical Engineering and Construction Management (ICAGECM '19),University 20 Aout 1955 (Skikda)
- 2019
-
2019
Caracterisation au Moyens Des Essais Non Destructifs (NDT) D’un BAP a Base des Granulats Recycles et Fumee de Silice
Résumé : Cette étude a été menée pour répondre à deux préoccupations principales, la possibilité de formuler des BAP à base des matériaux locaux (granulats recyclés) et l’influence du dosage d’une addition de fumée de silice et fillers calcaire sur le comportement rhéologique et mécanique des bétons autoplaçants. L’objectif de ce travail, est d’optimiser la formulation du BAP, par le choix du type et la proportion de l’ajout afin d’améliorer les propriétés mécaniques du béton autoplaçants (essais destructifs et essais non-destructifs), en même temps de garder les bonnes propriétés rhéologiques du BAP (capacités de remplissage, de passage et la résistance à la ségrégation). Les résultats obtenus montrent que l’utilisation de la fumée de silice seul ou combiné avec du calcaire à un taux limité améliore la performance d’une façon remarquable des BAP recyclés à base de ces ajouts par rapport à un béton recyclé témoin (sans fillers).
Citation
Larbi BELAGRAA , ibtissem allali , Miloud BEDDAR , imen yamina omri , ,(2019), Caracterisation au Moyens Des Essais Non Destructifs (NDT) D’un BAP a Base des Granulats Recycles et Fumee de Silice,1 st International Congress on Advances in Geotechnical Engineering and Construction Management ICAGECM’19,Skikda
- 2018
-
2018
L'effet Du Traitement Des Fibres Naturelles Sur l'endommagement D'un Béton Polymére
L’objectif de ce travail, c'est la valorisation des ressources naturelles telles que les fibres végétales en les utilisant comme renfort du béton polymère, et ce pour réduire l'impact envirommental et améliorer le comportement mécanique du béton à la flexion, compression et rupture. Dans ce travail, nous avons expérimenté l'effet de renforcement du béton polymère par deux types de fibres végétales (Doum et Alfa). L’influence du traitement chimique des fibres végétales (2% de NaOH) sur le comportement statique du béton polymère est également discutée. Pour comparaison, les fibres de verre courtes sont également utilisées. Les résultats des tests sur les différentes éprouvettes en béton polymère renforcées par ces fibres, montrent que le traitement alcalin des fibres végétales à un effet significatif sur le comportement à la flexion trois points, compression et rupture. Les résultats de ce travail suggèrent que les fibres de Doum sont comparables à d'autres fibres naturelles utilisées comme renforts dans des matrices polymériques. Elles sont complètement aptes à l'utilisation comme renfort dans les bétons polymères.
Citation
imen yamina omri , ,(2018), L'effet Du Traitement Des Fibres Naturelles Sur l'endommagement D'un Béton Polymére,Séminaire International De Génie Civil "SIGC 2018",Ecole National Polytechnique Maurice Audin (Oran)
- 2018
-
2018
comment préparé et élaboré un thèse de doctorat d'une façon méthodologique (cours orale)
Cette journée contient les points suivants: MOOC (Massive Open Online Course) - Ressources pédagogiques numériques pour le développement des compétences Comment va crée une bibliographie selon le sujet de doctorat et les axes de recherche scientifique. comment va rédigier un article scientifique. Méthodologie d'élaboration d'une thèse de doctorat , mémoire de Master 2 et projet de fin d'études Outils de recherche documentaire
Citation
imen yamina omri , ,(2018), comment préparé et élaboré un thèse de doctorat d'une façon méthodologique (cours orale),Journées d'accompagnement des doctorants,university of Larbi Ben M'hidi (Oum El Bouaghi)